sim> boot rp0
Loading boot code from vmb.exe

  
  VAX/VMS Version V3.0 26-APR-1982 16:21
  

%OPCOM,  1-FEB-1982 17:07:19.63, logfile initialized by operator OPA0
        logfile is SYS$MANAGER:OPERATOR.LOG
  Login quotas - Interactive limit=64, Current interactive value=0
  SYSTEM       job terminated at  1-FEB-1982 17:07:23.90


Username: SYSTEM
Password: 
        Welcome to VAX/VMS version V3.0


$ MC sysgen
SYSGEN>  CON CONS
SYSGEN>  EXIT

$ set uic [1,4]
$ set def sys$update
$ @vmsupdate

 
                  VMS Update Procedure
 
 This command procedure performs VAX/VMS software updates and
 optional  software  installations  for  VAX/VMS  Release  3.
 During this sequence, the standard  console  medium will not
 be present in the console  drive. Therefore,  the system may
 be vulnerable to a power  failure or other fatal crash. If a
 system  crash  should  occur  during  this period the update
 sequence  can  be  restarted  at  the beginning of the first
 incomplete update.
 
 Dismount the current console medium.
 
 Please place the first volume in the console drive
 

Are you ready to continue?: 

$! Insert Mandatory Update Floppy
Simulation stopped, PC: 80007B06 (BRB 80007B06)
sim> att rx VMSMUP030.rx1
sim> cont

Are you ready to continue?: yes

%MOUNT-I-MOUNTED, VMSV300      mounted on _CSA1:

        VAX/VMS Version 3.00 Update


Do you want all the updates applied? (Y/N, YES recommended): YES

Do you want an explanation of each update displayed during the update? (Y/N): YES

Do you want previous versions of updated files purged? (Y/N): N


  LOGINOUT

        ECO02   GAS0081         12-May-1982
                MODULE: LOGIN
                For network jobs, check to see if a UAF record
                was found.  If not, signal an authorization error
                and exit.

        ECO03   GAS0082         14-May-1982
                MODULE: LOGIN
                For network jobs, check to see if the LOGIN bit
                is set in the PCB.  If so, then allow logins without
                checking the authorization file.


%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file SYS$SYSROOT:[SYSEXE]LOGINOUT.EXE;2
%PATCH-I-WRTFIL, updating image file SYS$SYSROOT:[SYSEXE]LOGINOUT.EXE;2

  SYS

        ECO03   KDM0002         11-May-1982
                MODULE: MDAT
                Indicate network login patch applied.

        ECO04   KDM0003         14-May-1982
                MODULE: MDAT
                Indicate second network login patch applied.

%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file SYS$SYSROOT:[SYSEXE]SYS.EXE;2
%PATCH-I-WRTFIL, updating image file SYS$SYSROOT:[SYSEXE]SYS.EXE;2
 

Are there more kits to process?: n

 
 Please place the system console medium in the console drive.
 

Are you ready to continue?: yes

%MOUNT-I-MOUNTED, CONSOLE      mounted on _CSA1:
 Requested update sequence is complete.

$ @sys$system:shutdown

        System shutdown command procedure.


How many minutes until shutdown [0]? 
Reason? 

Do you want to spin down the disks [No]? 
Expected uptime (<RET> if not known)? 

Enable automatic reboot [No]? 

%OPCOM,  1-FEB-1982 17:09:40.47, operator status for operator OPA0
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, OPER1, OPER2,
OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11,
OPER12
  Login quotas - Interactive limit=0, Current interactive value=1
        Non-operator logins are disabled.

__OPA0:,SYSTEM       17:09:40.64
Batch and device queues have been stopped.

__OPA0:,SYSTEM       17:09:40.70
System shutdown in 0 minutes.  Logins are disabled; please log out.
        Invoke installation dependent shutdown procedure.
        Stop all user processes.
        Remove installed images.
        Dismount all mounted volumes.
%OPCOM,  1-FEB-1982 17:09:45.54, message from user SYSTEM      
__OPA0:, Operator requested shutdown
%OPCOM,  1-FEB-1982 17:09:45.58, logfile closed by operator OPA0
        logfile was SYS$MANAGER:OPERATOR.LOG
  
   SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80007D3C (BRB 80007D3C)
sim> boot rp0
Loading boot code from vmb.exe

  
  VAX/VMS Version V3.0 26-APR-1982 16:21
  

%OPCOM,  1-FEB-1982 17:10:50.49, logfile initialized by operator OPA0
        logfile is SYS$MANAGER:OPERATOR.LOG
  Login quotas - Interactive limit=64, Current interactive value=0
  SYSTEM       job terminated at  1-FEB-1982 17:10:54.72


Username: SYSTEM
Password: 
        Welcome to VAX/VMS version V3.0

$ @sys$system:shutdown

        System shutdown command procedure.


How many minutes until shutdown [0]? 
Reason? 

Do you want to spin down the disks [No]? 
Expected uptime (<RET> if not known)? 

Enable automatic reboot [No]? 

%OPCOM,  1-FEB-1982 17:26:47.66, operator status for operator OPA0
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, OPER1, OPER2,
OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11,
OPER12
  Login quotas - Interactive limit=0, Current interactive value=1
        Non-operator logins are disabled.

_OPA0:,SYSTEM       17:26:47.84
Batch and device queues have been stopped.

_OPA0:,SYSTEM       17:26:47.86
System shutdown in 0 minutes.  Logins are disabled; please log out.
        Invoke installation dependent shutdown procedure.
        Stop all user processes.
        Remove installed images.
        Dismount all mounted volumes.
%OPCOM,  1-FEB-1982 17:26:52.76, message from user SYSTEM      
_OPA0:, Operator requested shutdown
%OPCOM,  1-FEB-1982 17:26:52.80, logfile closed by operator OPA0
        logfile was SYS$MANAGER:OPERATOR.LOG
  
   SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80007D3C (BRB 80007D3C)
sim> exit
Goodbye
